Alfa Appliances

Las Vegas Premier Appliance Company

PRICES

DIAGNOSTIC FEE - $85

ALL PRICES ARE ESTIMATED AND MAY VARY, DEPENDING ON THE SPECIFIC MODEL OF THE APPLIANCE!!!
EXACT COST OF REPAIR CAN BE DETERMINED ONLY AFTER ALFA APPLIANCES PROFFECIONAL INSPECTION AND DIAGNOSTIC!!!

Diagnostic fee will be deducted from the total amount of the repair cost (labor and parts), if performed by us. If you don’t want us to do the repair you simply pay us the diagnostic fee.

WASHER SERVICES:

INSTALLATION - $99

Washer installation includes: connect washing machine to existing water lines and valves, existing outlet and existing drainage.
Hot/cold water hoses not included.

MAINTENANCE - $139

Washing machine maintenance includes: Inspect for proper functioning, wear and tear, excess noise, water leaks and clean internal components.

REPAIR AND PARTS REPLACEMENT:

FRONT LOAD WASHERS

  • Drain pump replacement - $175
  • Water valve replacement - $150
  • Door latch replacement - $175
  • Door boot replacement - $250
  • Tub bearing kit and main seal replacement - $350
  • Shock absorbers kit replacement - $250
  • Water level switch replacement - $150
  • Control board replacement – price depends on model# (minimum charge of $85 for labor)
  • Control panel replacement – price depends on model# (minimum charge of $85 for labor)
  • Rotor replacement - $250
  • Stator replacement - $250
  • Position sensor replacement (if sold separate) - $150
  • Spin basket spider and bearing kit replacement - $470
  • Drain hose replacement - $160
  • Drive pulley replacement - $180
  • Drive belt replacement - $165
  • Motor control board - $375
  • Motor replacement - $425

TOP LOAD WASHER

  • Motor coupler replacement - $140
  • Drain pump replacement - $175
  • Lid switch replacement - $140
  • Motor replacement - $299
  • Transmission replacement - $350
  • Transmission clutch replacement - $170
  • Basket drive replacement - $299
  • Main seal replacement - $250
  • Agitator dogs replacement - $125
  • Agitator replacement - $199
  • Water valve replacement - $160
  • Water valve replacement (multiple valves kit) - $240
  • Water level switch replacement - $180
  • Timer replacement – price depends on model# (minimum charge of $85 for labor)
  • Drain hose replacement - $160
  • Inverter motor replacement - $399
  • Drive belt replacement - $160
  • Suspension rods kit replacement - $170
  • Shaft and bearing kit replacement - $350
  • Tub hub replacement - $125
  • Control board replacement – price depends on model# (minimum charge of $85 for labor)
  • Rotor replacement - $250
  • Stator replacement - $250
  • Position sensor replacement (if sold separate) - $150
  • Gear case replacement - $450
  • Actuator replacement - $135
  • Drive pulley replacement - $135
  • Shaft replacement GE - $399
  • Transmission replacement GE - $550
  • Control knob replacement - $125
  • Dampening straps kit replacement - $150

DRYER SERVICES

INSTALLATION - $99

Dryer installation includes: connect dryer to existing gas line, water line and valve (if equipped with steamer), existing electric outlet and existing house vent.

IMPORTANT: Make sure that you have proper electric outlet! (gas dryers use 110V and electric dryers use 220V)

Gas yellow flex line and dryer vent hose not included.

MAINTENANCE - $139

Dryer maintenance includes: Inspect for proper functioning, wear and tear, excess noise, gas leak (if gas dryer) and clean internal components and lubricate moving parts.

DRYER HOUSE VENT CLEANING - $139
(up to 5 feet long)

Extra charge will be applied for any additional services: dryer vent hose replacement, dryer internal cleaning, dryer gas yellow flex line replacement, dryer moving parts lubrication and maintenance.

REPAIR AND PARTS REPLACEMENT:

ELECTRIC OR GAS DRYER

  • Drive pulley replacement - $165
  • Drive belt replacement - $165
  • Motor replacement - $299
  • Igniter replacement - $175
  • Control board replacement – price depend on model# (minimum charge of $85 for labor)
  • Control panel replacement – price depend on model# (minimum charge of $85 for labor)
  • Thermal fuse replacement - $175
  • Electric dryer heating element replacement - $225
  • Drum wheels (rollers) replacement - $199
  • Samsung gas coils replacement - $165
  • LG gas valve coil assembly replacement - $299
  • Timer replacement – price depend on model# (minimum charge og $85 for labor)

REFRIGERATOR SERVICES

INSTALLATION - $99

Refrigerator installation includes: Connecting refrigerator water valve to existing house water valve and existing electric outlet. Setting manufacturer’s recommended temperatures in refrigerator and freezer section. Making sure refrigerator works as design at start up.
Does not include water line kit.

MAINTENANCE - $125

Refrigerator maintenance includes: Removing dust from condenser coils. Inspect refrigerator components for proper functioning, wear and tear, excess noise, water leak, proper cooling and adjust temperatures if necessary.

WATER FILTER REPLACEMENT - $135

REPAIR AND PARTS REPLACEMENT:

SIDE-BY-SIDE, FRENCH DOOR OR TOP FREEZER REFRIGERATORS

  • Evaporator motor fan replacement - $225
  • Defrost thermostat, thermistor replacement - $185
  • Defrost heating element replacement - $225
  • Condenser motor fan replacement - $225
  • Damper replacement - $225
  • Ice maker replacement – price depends on model# (minimum charge of $85 for labor)
  • Water valve replacement - $199
  • Compressor replacement – price depends on model#
  • Sealed system repair (no parts) - $250
  • Control board replacement – price depends on model#
  • Control thermostat replacement - $225
  • Defrost timer replacement - $225

RANGE/OVEN SERVICES

INSTALLATION

  • FREE STANDING RANGE - $139 (does not include yellow flex gas line for gas ranges, does not include 220V plug for electric ranges)
  • BUILD-IN OVEN - $199 (does not include yellow flex gas line for gas ovens, does not include 220V plug for electric ovens)

Installation includes: connect machine to existing gas line and existing electric outlet.

IMPORTANT: Make sure that you have proper electric outlet! (gas range/oven uses 110V and electric range/oven uses 220V). Remodeling and relocation of cabinets must be executed by professional carpenter! Make sure range/oven size and type match the existing cabinets configuration and opening.

MAINTENANCE - $99

Range/Oven maintenance includes: Inspect for proper functioning, wear and tear, excess noise, gas leak (if gas range/oven). Monitor heating temperature and adjust control thermostat or control board if necessary.

REPAIR AND PARTS REPLACEMENT:

ELECTRIC OR GAS RANGE/OVEN

  • Igniter replacement - $185
  • Heating element replacement – price depends on model# (minimum charge of $85 for labor)
  • Temperature sensor replacement - $175
  • Temperature sensor replacement (build-in) - $250
  • Thermal fuse replacement (build-in) - $250
  • Spark ignition module replacement - $299
  • Igniter switch replacement - $250
  • Control board replacement – price depends on model# (minimum charge of $85 for labor)
  • Control thermostat replacement – price depends on model# (minimum charge of 85 for labor)
  • Gas valve replacement - $299
  • Burner spark igniter replacement - $199
  • Electrical surface coils replacement - $175
  • Surface switch replacement - $175
  • Spark module replacement - $225

COOKTOP SERVICES

INSTALLATION - $139

Cooktop installation includes: connect cooktop to existing gas line and existing electric outlet.

IMPORTANT: Make sure that you have proper electric outlet! (gas cooktop uses 110V and electric cooktop uses 220V). Make sure cooktop size and type match the existing countertop opening. Remodeling and cuts of countertop is done by professional countertop installers.

MAINTENANCE - $99

Cooktop maintenance includes: Inspect for proper functioning, wear and tear, excess noise, gas leak (if gas cooktop).


Does not include yellow flex gas line for gas cooktops, does not include 220V plug for electric cooktops

REPAIR AND PARTS REPLACEMENT:

ELECTRIC OR GAS COOKTOP

  • Spark igniter replacement - $225
  • Spark module replacement - $225
  • Gas valve replacement - $250
  • Igniter switch replacement - $250

MICROWAVE SERVICES

INSTALLATION - $149

Microwave installation includes: attach microwave to existing microwave cabinet. Remodeling and relocation of cabinets must be executed by professional carpenter.

IMPORTANT: Make sure microwave size and type match the existing cabinets configuration and opening. Electric outlet needs to be at least 20 AMP!

Does not include hardware.

MAINTENANCE - $99

Microwave maintenance includes: Inspect for proper functioning, wear and tear, excess noise. Filters check.

FILTERS REPLACEMENT - $199

REPAIR AND PARTS REPLACEMENT:

COUNTERTOP, BUILD-IN OR OVER THE RANGE MICROWAVE

  • Magnetron replacement - $225
  • Transformer replacement - $250
  • Diode, capacitor replacement - $199
  • Door switch replacement - $150
  • Vent motor replacement - $299
  • Fan motor replacement - $250
  • Turntable motor replacement - $175
  • Lights replacement - $175
  • Control board replacement – price depends on model# (minimum charge of $85 for labor)
  • Control panel replacement - price depends on model# (minimum charge of $85 for labor)
  • Turntable coupler replacement - $150

DISHWASHER SERVICES

INSTALLATION - $199

Dishwasher installation includes: connect dishwasher to existing air gap, drainage and existing 3/8 hot water valve.

Does not include electrical cord, drain hose, water supply line, air gap.

MAINTENANCE - $99

Dishwasher maintenance includes: Inspect for proper functioning, wear and tear, excess noise, leaking. Filters check.

REPAIR AND PARTS REPLACEMENT:

BUILD-IN DISHWASHER

  • Water inlet valve replacement - $165
  • Drain hose replacement - $185
  • Drain pump replacement - $185
  • Motor-pump assembly replacement - $350
  • Soap dispenser replacement - $225
  • Flow sensor replacement - $150
  • Case break and float sensor replacement - $250
  • Spray arm replacement - $160
  • Door gasket replacement - $175
  • Door latch - $199
  • Timer replacement - $199
  • Control board replacement – price depends on model#
  • Control panel replacement – price depends on model#
  • Dishrack replacement – price depends on model#
  • Door hinge links replacement - $160
  • Door hinge springs replacement - $160

EXHAUST HOOD SERVICES

Installation - $250

Installation includes: attach exhaust hood to existing cabinet and plug into existing electric outlet. Remodeling and relocation of cabinets must be executed by professional carpenter.

IMPORTANT: Make sure exhaust hood size and type match the existing cabinets configuration and opening.

Does not include hardware.

MAINTENANCE - $99

FILTER REPLACEMENT - $199

Exhaust hood maintenance includes: Inspect for proper functioning, wear and tear, excess noise. Filters check.

REPAIR AND PARTS REPLACEMENT:

EXHAUST HOOD

  • Parts and labor prices depend on model#

Please be advised that the final cost of the repair may vary + - 30 %!!!
Please call us to schedule an appointment for an ALFA APPLIANCES professional technician to go out and give you accurate estimate!